Rain-X Removal for Windshield Repair

X-Phobic

X Phobic is a hydrophobic coating remover (patent pending) is for the removal of Rain-X to allow windshield repair resins to bond to the windshield glass. Without removal of Rain-X the windshield repair resin will be blocked from the glass and the chip or crack repair cannot be bond. This will cause the consumer to have to pay hundreds of dollar for a new windshield and the windshield repair technician loses a repair job. Currently windshield repair technicians are losing hundreds of dollars per month due to the presence of Rain-X on the windshield.

This chemical mixture is a Rain-X remover for windshield repair and it will also remove carwash wax and detergents, moisture and other contaminants.

Directions:

Some technicians are reporting that Rain-X is on 40% of windshields. You should test every windshield for Rain-X before starting the repair by placing a drop or two of water on the windshield surface. If it beads and rolls, there is a hydrophobic coating, most likely Rain-X. If the water rolls down and leaves a line of water then there is none.

Directions for a windshield chip repair

Add one drop of the additive into your injector with 4 drops of resins. Mix with a toohtpick and then do the repair. Note: Immediately wipe off any excess from the windshield surface.

Directions for windshield crack repair

Add one drop of the additive into your injector with 5 drops of resins. Mix with aplastic toohtpick and then do the repair. Note: immediately wipe any excess off the windshield surface.

What to Charge the Customer

Our MSRP for Rain-X removal is $10.00. This is to cover your product cost and labor.

Purchase Price

One bottle for $19.95 will decontaminate over 50 breaks. Don’t lose another job to Rain-X!

To Order X-Phobic click here